Powertech Technology Inc. (stock code 6239) is establishing FOPLP and silicon photonics CPO production lines at its P11 and L3C facilities in Hsinchu Science Park, with AMD project equipment installation completed. Small-volume trial production is planned for the first half of 2027, with mass production by mid-2027. The L3C facility uses a two-floor configuration: first floor for wafer-end Mid-end processes, second floor for On Substrate processes, completing Chip on Wafer or Chip on Panel before assembly onto ABF substrates.
Powertech Establishes FOPLP and CPO Production Lines in Hsinchu Science Park
Powertech is simultaneously building FOPLP and silicon photonics CPO production lines at its P11 and L3C facilities in Hsinchu Science Park. AMD project equipment has completed installation. The company plans small-volume trial production in the first half of 2027, with mass production scheduled by mid-2027. The L3C facility adopts a two-layer Fab configuration, with the first floor handling wafer-end Mid-end processes and the second floor operating On Substrate processes. After completing Chip on Wafer or Chip on Panel, products are assembled onto ABF substrates. Both R&D and production lines are advancing toward large-size heterogeneous integration.
Panel-Level Packaging Adopts 510×515mm Standard with 90%+ Yield
Powertech has been developing panel-level packaging for over 10 years, beginning R&D from 2014 to 2015. The company standardized on a 510×515mm panel size, balancing area utilization and process difficulty. Current development has exceeded 5× Reticle Size products, with equipment capable of producing 9× Reticle Size by year-end, and subsequent configuration targeting 14× Reticle Size. Using Panel processes, large AI chip single-run output can reach 45 units, higher than wafer processes' approximately 8 to 9 units. FOPLP yield rate has reached over 90%.
FC BGA MCM Production Expands to 78×75mm Size
Powertech's advanced packaging product line is accelerating large chip and module integration. The company has established FC BGA MCM mass production capability, with maximum size reaching 78×75mm. In the third quarter of 2026, Powertech introduced 1× Reticle Size large chip packaging and began mass production. In the fourth quarter of 2026, the company is advancing into larger size packaging, integrating SoC and DRAM chips.
Optical Engine Small-Volume Production Scheduled for End of 2026
Silicon photonics scheduling is also set. Optical Engine using μ-bump technology will enter small-volume production at the end of 2026 for customer verification. Integration into CPO Switch applications is scheduled for the second half of 2027. The company targets silicon photonics CPO switch production in 2028. For memory packaging, TSV Interconnection development is complete, with DDR5 trial production concluded. In the fourth quarter of 2026, Powertech will begin shipping DRAM products using TSV connection technology.
Advanced Packaging Revenue Exceeds 30% of Group Total
When calculating Flip-Chip BGA, Bumping, Fan-Out PLP, and 2.5D/3D together, advanced packaging revenue has exceeded 30% of the group's total. Fourth quarter 2026 revenue is planned to exceed third quarter 2026.
FAQ
What is Powertech's timeline for FOPLP mass production?
Powertech plans small-volume trial production in the first half of 2027, with mass production scheduled by mid-2027. AMD project equipment installation at the P11 and L3C facilities in Hsinchu Science Park has been completed.
What panel size does Powertech use for panel-level packaging?
Powertech standardized on a 510×515mm panel size for panel-level packaging, balancing area utilization and process difficulty. The company has been developing panel-level packaging for over 10 years, with FOPLP yield rate reaching over 90%.
When will Powertech integrate silicon photonics into CPO Switch applications?
Optical Engine using μ-bump technology will enter small-volume production at the end of 2026 for customer verification. Integration into CPO Switch applications is scheduled for the second half of 2027, with silicon photonics CPO switch production targeted for 2028.